How To Solder: A Complete Beginners Guide - (2023)

How To Solder: A Complete Beginners Guide - (1)
Learning how to solder w/ proper soldering techniques is a fundamental skill every maker should master. In this tutorial, we outline the basics of soldering irons, soldering stations, types of solder, desoldering and safety tips. Whether you’re building a robot or working with Arduino, knowing how to solder will come in handy.

FREE EBOOK (PDF)Learn How To Solder (17 Page Ebook)

If you were to take apart any electronic device that contains a circuit board, you’ll see the components are attached using soldering techniques. Soldering is the process of joining two or more electronic parts together by melting solder around the connection. Solder is a metal alloy and when it cools it creates a strong electrical bond between the parts. Even though soldering can create a permanent connection, it can also be reversed using a desoldering tool as described below.

How To Solder: A Complete Beginners Guide - (2)

The good thing about learning how to solder is the fact that you don’t need a lot to get started. Below we’ll outline the basic tools and materials you will need for most of your soldering projects.

Soldering Iron

A soldering iron is a hand tool that plugs into a standard 120v AC outlet and heats up in order to melt solder around electrical connections. This is one of the most important tools used in soldering and it can come in a few variations such as pen or gun form. For beginners, it’s recommended that you use the pen style soldering iron in the 15W to 30W range. Most soldering irons have interchangeable tips that can be used for different soldering applications. Be very cautious when using any type of soldering iron because it can heat up to 896′ F which is extremely hot.

How To Solder: A Complete Beginners Guide - (3)

Soldering Station

A soldering station is a more advanced version of the basic standalone soldering pen. If you are going to be doing a lot of soldering, these are great to have as they offer more flexibility and control. The main benefit of a soldering station is the ability to precisely adjust the temperature of the soldering iron which is great for a range of projects. These stations can also create a safer workspace as some include advanced temperature sensors, alert settings and even password protection for safety.

How To Solder: A Complete Beginners Guide - (4)

Soldering Iron Tips

At the end of most soldering irons is an interchangeable part known as a soldering tip. There are many variations of this tip and they come in a wide variety of shapes and sizes. Each tip is used for a specific purpose and offers a distinct advantage over another. The most common tips you will use in electronics projects are the conical tip and the chisel tip.

Conical Tip – Used in precision electronics soldering because of the fine tip. Because of its pointed end, it’s able to deliver heat to smaller areas without affecting its surroundings.

Chisel Tip – This tip is well-suited to soldering wires or other larger components because of its broad flat tip.

How To Solder: A Complete Beginners Guide - (5)

Brass or Conventional Sponge

Using a sponge will help to keep the soldering iron tip clean by removing the oxidation that forms. Tips with oxidation will tend to turn black and not accept solder as it did when it was new. You could use a conventional wet sponge but this tends to shorten the lifespan of the tip due to expansion and contraction. Also, a wet sponge will drop the temperature of the tip temporarily when wiped. A better alternative is to use a brass sponge as shown on the left.

(Video) How To Solder: A Complete Beginners Guide - .

How To Solder: A Complete Beginners Guide - (6)

Soldering Iron Stand

A soldering iron stand is very basic but very useful and handy to have. This stand helps prevent the hot iron tip from coming in contact with flammable materials or causing accidental injury to your hand. Most soldering stations come with this built in and also include a sponge or brass sponge for cleaning the tip.

How To Solder: A Complete Beginners Guide - (7)


Solder is a metal alloy material that is melted to create a permanent bond between electrical parts. It comes in both lead and lead-free variations with diameters of .032″ and .062″ being the most common. Inside the solder core is a material known as flux which helps improve electrical contact and its mechanical strength.

For electronics soldering, the most commonly used type is lead-free rosin core solder. This type of solder is usually made up of a Tin/Copper alloy. You can also use leaded 60/40 (60% tin, 40% lead) rosin core solder but it’s becoming less popular due to health concerns. If you do use lead solder, make sure you have proper ventilation and that you wash your hands after use.

How To Solder: A Complete Beginners Guide - (8)

When buying solder, make sure NOT to use acid core solder as this will damage your circuits and components. Acid core solder is sold at home improvement stores and is mainly used for plumbing and metal working.

As mentioned earlier, solder does come in a few different diameters. The thicker diameter solder (.062″) is good for soldering larger joints more quickly but it can make soldering smaller joints difficult. For this reason, it’s always a good idea to have both sizes on hand for your different projects.

Helping Hand (Third Hand)

A helping hand is a device that has 2 or more alligator clips and sometimes a magnifying glass/light attached. This clips will assist you by holding the items you are trying to solder while you use the soldering iron and solder. A very helpful tool to have in your makerspace.

How To Solder: A Complete Beginners Guide - (9)

Now that you know what tools and materials are required, it’s time to briefly discuss ways of staying safe while soldering.

Soldering irons can reach temperatures of 800′ F so it’s very important to know where your iron is at all times. We always recommend you use a soldering iron stand to help prevent accidental burns or damage.

How To Solder: A Complete Beginners Guide - (10)

(Video) How To Solder Tutorial

Make sure you are soldering in a well ventilated area. When solder is heated, there are fumes released that are harmful to your eyes and lungs. It’s recommended to use a fume extractor which is a fan with a charcoal filter that absorbs the harmful solder smoke you can visit sites like Integrated Air Systems for air filtration systems.

It’s always a good idea to wear protective eye wear in case of accidental splashes of hot solder. Lastly, make sure to wash your hands when done soldering especially if using lead solder.

Before you can start soldering, you need to prep your soldering iron by tinning the tip with solder. This process will help improve the heat transfer from the iron to the item you’re soldering. Tinning will also help to protect the tip and reduce wear.

Step 1: Begin by making sure the tip is attached to the iron and screwed tightly in place.

Step 2: Turn on your soldering iron and let it heat up. If you have a soldering station with an adjustable temp control, set it to 400′ C/ 752′ F.

Step 3: Wipe the tip of the soldering iron on a damp wet sponge to clean it. Wait a few seconds to let the tip heat up again before proceeding to step 4.

Step 4: Hold the soldering iron in one hand and solder in the other. Touch the solder to the tip of the iron and make sure the solder flows evenly around the tip.

How To Solder: A Complete Beginners Guide - (11)

You should tin the tip of your iron before and after each soldering session to extend its life. Eventually, every tip will wear out and will need replacing when it becomes rough or pitted.

To better explain how to solder, we’re going to demonstrate it with a real world application. In this example, we’re going to solder an LED to a circuit board.

Step 1: Mount The Component – Begin by inserting the leads of the LED into the holes of the circuit board. Flip the board over and bend the leads outward at a 45′ angle. This will help the component make a better connection with the copper pad and prevent it from falling out while soldering.

How To Solder: A Complete Beginners Guide - (12)

(Video) Soldering - 4 Tips for Professional Results

Step 2: Heat The Joint – Turn your soldering iron on and if it has an adjustable heat control, set it to 400’C. At this point, touch the tip of the iron to the copper pad and the resistor lead at the same time. You need to hold the soldering iron in place for 3-4 seconds in order to heat the pad and the lead.

How To Solder: A Complete Beginners Guide - (13)

Step 3: Apply Solder To Joint – Continue holding the soldering iron on the copper pad and the lead and touch your solder to the joint. IMPORTANT – Don’t touch the solder directly to the tip of the iron. You want the joint to be hot enough to melt the solder when it’s touched. If the joint is too cold, it will form a bad connection.

How To Solder: A Complete Beginners Guide - (14)

Step 4: Snip The Leads – Remove the soldering iron and let the solder cool down naturally. Don’t blow on the solder as this will cause a bad joint. Once cool, you can snip the extra wire from leads.

A proper solder joint is smooth, shiny and looks like a volcano or cone shape. You want just enough solder to cover the entire joint but not too much so it becomes a ball or spills to a nearby lead or joint.

How To Solder: A Complete Beginners Guide - (15)

Now it’s time to show you how to solder wires together. For this process, it’s recommended to use helping hands or other type of clamp device.

Begin by removing the insulation from the ends of both wires you are soldering together. If the wire is stranded, twist the strands together with your fingers.

How To Solder: A Complete Beginners Guide - (16)

Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. Hold it on the wire for 3-4 seconds.

How To Solder: A Complete Beginners Guide - (17)

Keep the iron in place and touch the solder to the wire until it’s fully coated. Repeat this process on the other wire.


How To Solder: A Complete Beginners Guide - (18)

Hold the two tinned wires on top of each other and touch the soldering iron to both wires. This process should melt the solder and coat both wires evenly.

How To Solder: A Complete Beginners Guide - (19)

Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. Use heat shrink to cover the connection.

How To Solder: A Complete Beginners Guide - (20)

The good thing about using solder is the fact that it can be removed easily in a technique known as desoldering. This comes in handy if you need to remove a component or make a correction to your electronic circuit.

To desolder a joint, you will need solder wick which is also known as desoldering braid.

How To Solder: A Complete Beginners Guide - (21)

Step 1 – Place a piece of the desoldering braid on top of the joint/solder you want removed.

Step 2 – Heat your soldering iron and touch the tip to the top of the braid. This will heat the solder below which will then be absorbed into the desoldering braid. You can now remove the braid to see the solder has been extracted and removed. Be careful touching the braid when you are heating it because it will get hot.

How To Solder: A Complete Beginners Guide - (22)

Optional – If you have a lot of solder you want removed, you may want to use a device called a solder sucker. This is a handheld mechanical vacuum that sucks up hot solder with a press of a button.

To use, press the plunger down at the end of the solder sucker. Heat the joint with your soldering iron and place the tip of the solder sucker over the hot solder. Press the release button to suck up the liquid solder. In order to empty the solder sucker, press down on the plunger.

(Video) Introduction to Soldering | How To Makerspace Delft

How To Solder: A Complete Beginners Guide - (23)

FREE EBOOK (PDF)Learn How To Solder (17 Page Ebook)


How do you solder in 10 easy steps? ›

How To: Soldering
  1. Step 1: Solder. For Simple Bots, the ideal solder is . ...
  2. Step 2: Turn It On. Before any soldering can be done, the soldering iron needs to be turned on and heated to the desired temperature. ...
  3. Step 3: Picking It Up. ...
  4. Step 4: Putting It Down. ...
  5. Step 5: Tin the Tip. ...
  6. Step 6: Strip Wires. ...
  7. Step 7: Twist. ...
  8. Step 8: Solder.

Can I teach myself to solder? ›

Everyone can learn how to solder. And it's an important skill to know want to build electronics. Basic soldering is easy. All you need is a soldering iron and some solder.

What are the 6 steps of soldering? ›

Just Follow the instructions given below and Watch The Video to get Perfect Soldering Results!
  • Step 1: What You'll Need. A 20-40 Watt Soldering iron or a Mini Soldering Station. ...
  • Step 2: Tinning. ...
  • Step 3: Soldering Wires. ...
  • Step 4: Soldering on PCB's. ...
  • Step 5: Cleaning the Flux. ...
  • Step 6: Soldering Tips! ...

What is the golden rule of soldering? ›

Always make sure the area which you wish to solder is clean, dry and free from grease. If necessary clean the area with a solvent (MEK, Mek Pak, Plasticweld or generic equivalents). The area must also be bright ready to take the solder. Abrade the metal so that there is no oxidisation present.

What are the 7 steps of soldering? ›

The steps involved in making a soldered joint include pre-cleaning, fitting the parts, applying flux, heating the desired sections of the parts, applying the solder, cooling the soldered joint and post-cleaning.

What is the easiest solder for beginners? ›

If you are repairing or assembling electronics for use in the US, lead solder is the easiest to work with and it forms the most reliable solder joints. The lower heat also generates less thermal stress on the rest of the PCB.

What is the secret to soldering? ›

The secret of good soldering is to use the right amount of heat. Many people who have not soldered before use too little heat, dabbing at the joint to be soldered and making little sol- der blobs that cause unintended short circuits. The two key factors in quality soldering are time and tem- perature.

What not to do when soldering? ›

Soldering Safety
  1. Never touch the element of the soldering iron.... 400°C!
  2. Hold wires to be heated with tweezers or clamps.
  3. Keep the cleaning sponge wet during use.
  4. Always return the soldering iron to its stand when not in use. Never put it down on the workbench.
  5. Turn unit off and unplug when not in use.

What are the 3 types of soldering? ›

Types of Soldering

Soldering methods fall into three main categories: hand soldering, reflow soldering, and wave soldering. Hand soldering forms each joint individually by simultaneously applying a hot soldering iron and a wire made of solder to the two surfaces to be joined.

Why is it so hard to solder? ›

If you let the solder sit on the iron, the flux quickly boils off (the fumes are from flux, not the lead). And without flux, soldering becomes almost impossible. Flux removes oxidation from metals, and it's crucial because solder won't stick to oxidized metals, and metals oxidize very quickly at soldering temperatures.

Do you start with easy or hard solder? ›

Using solders with different melting points will keep you from re-flowing previously completed joints. For example, you'll use hard solder on the first joint, medium on the second joint, and easy on the third joint. Your solder metal should have a lower melting point than the two metal pieces you're fusing.

What is the most important step in soldering? ›

Step 1 – Melting the Solder

It is the basic requirement of the process to melt the solder. The wave soldering machine has solder contained in a tank. The tank is heated to melt the solder. Appropriate temperature is reached to meet the right consistency, so that the process of soldering can be carried out further.

What are the 3 basic principles of soldering? ›

Principles and Techniques in Soldering
  • The metal pieces to be joined must be clean.
  • The correct soldering device must be used and must be in good condition.
  • The correct solder and soldering agent, called flux, must be carefully chosen.
  • The proper amount of heat must be applied.

What is the best technique for soldering? ›

Tech Tips: Soldering Tips for Beginners
  • Clean the tip often with iron wool, a wet sponge and tip cleaner.
  • Don't apply pressure on the soldering iron.
  • Don't move the joint while its cooling and don't blow on it to cool it off.
  • Practice on scrap before starting your project.
  • Remember, practice makes perfect!

What are the 4 steps of soldering? ›

Flux – please see the page titled: Soldering 101 – Oxidation, Flux, and Firescale/stain Prevention.
  • Step One: Good Fit. This just means that the two pieces of metal that you are joining together, fit as closely as possible. ...
  • Step 2: Clean Metal/Solder/Flux/Hands. ...
  • Step 3: Heat. ...
  • Step 4: Flux.
Apr 18, 2022

Do I need flux to solder? ›

Flux is an essential component in electronic soldering. It removes oxides, promotes wetting, enhances solder flow, and prevents re-oxidation, all of which contribute to the formation of strong and reliable solder joints.


1. How to Solder, Beginners Guide | Soldering 101
(Dean V)
2. Intro To Soldering
(The Hive Makerspace)
3. Soldering Tutorial
(UW Makerspace)
4. JBC I JTSE Hot Air Station I Makes your life easy
(JBC Soldering Tools)
5. Soldering Tutorial
(UCSD ECE Makerspace)
6. How to Solder - Learn to Solder - The right way for beginners Part 1
Top Articles
Latest Posts
Article information

Author: Nicola Considine CPA

Last Updated: 20/09/2023

Views: 5243

Rating: 4.9 / 5 (49 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Nicola Considine CPA

Birthday: 1993-02-26

Address: 3809 Clinton Inlet, East Aleisha, UT 46318-2392

Phone: +2681424145499

Job: Government Technician

Hobby: Calligraphy, Lego building, Worldbuilding, Shooting, Bird watching, Shopping, Cooking

Introduction: My name is Nicola Considine CPA, I am a determined, witty, powerful, brainy, open, smiling, proud person who loves writing and wants to share my knowledge and understanding with you.